So awhile ago after binge watching some YouTube videos I was certain that I needed to have a Plasma CNC, you know like every normal person. Having no experience with CAM and very little CAD experience, how hard could it be. Just over a year later I finally get it fully assembled, and then a couple of months later got the plasma cutter hooked up and started making sparks. So to have a place to keep a plasma CNC and various other tools that I really have no business having, I rent a decrepit and overpriced workshop. Don’t get me wrong as shitty as it is, it’s very nice not to have to try to figure out where to put my sit, I mean tools. It’s also so nice not to work on projects in a moldy basement or in the crap North Idaho weather for 9 months a year. Also, my friends enjoy having a place to work on stuff as well. My big thing is I am ok spending too much money as long as it is getting used and beneficial to others. Kinda weird philosophy for someone who inherently dislikes people, but what can I say, I am a walking conundrum.
With that overly wordy section done let’s mention the first project with this thing. So what do you do when you have a plasma CNC? Well after tripping over a dozen tools and other random crap just to power the damn thing on I had an epiphany… let’s use it to make some brackets and other parts to get the crap off the ground.
The Grinder Holders
So the first 2 things I happened to trip over were my angle grinders, so that seemed like a logical place to start. Grabbing a sheet of 18ga sheet metal, you know the cheapest overpriced metal I have… quick rant: what dumbass says I know what I’ll do now that COVID is a thing and the price of everything is soaring, I’ll get into metal and wood working… I take it over to the table and make my first actual cut on the machine to use it to cut out a 2×4 ft section to work with. Normally I am not a fan of proprietary software made by a company making cnc’s or 3d printers, but I have to admit, the Langmuir software isn’t half bad, and having the ability to generate a straight cut without having to open fusion to create a CAD/CAM file for something so simple was nice.
So now to design a bracket for the angle grinder holder, wait why reinvent the wheel. So over to the FireShare website, I start to look for one someone else has made and get horribly distracted, you know like my writing. 45 minutes later I finally decide on a design by Wolfgang Hofer. So it’s not the greatest design that I could have chosen, but it did have the cut file ready to load and go.
So yeah 18ga, while it did work, if I had to do it over again I would definitely use 16ga or larger so it’s a little less flimsy. I was able to run this at 25A with 180IPM with decent results.
The next thing I tripped over was 3 different hammers. You know those hammers I can never find when I actually need them. So that’s my next project, but this time I decide that I need to design it myself. I went and grabbed some measurement off the 3 hammers I tripped over and made some educated guesstimates on what I should dimension the part to. After having watched 2 YouTube videos I decided I was a Fusion 360 sheet metal expert and went after it. I have to say after the first 15 minutes of cussing at it trying to flange an extruded sketch, before realizing I should have used flange on even the first sketch instead of extruding, it went pretty well. Well, well enough, you tell me.
If you like the design you can grab it here.